Concrete Pouring

Probably the main service that we enjoy doing with our concrete company is making your dreams a reality. If you trust us with pouring your brand new driveway, patio, sidewalk, etc., we will not disappoint. The new projects are always our favorite, just like when you get a sense of pride when it's finished and it looks good, so do we because we were there too! We take great care in every large project we take and we complete them to the highest quality possible.

Every project is unique. And every customer will have different needs and require different planning. We enjoy the variety, it's like we never do the same project twice. Each time we do an installation though, we follow the same general procedure to ensure that nothing goes wrong or is delayed, whether it is a commercial or residential installation.
  1. Preparation: The first thing to do on any job site is to clear the area and clean the placement, this can often times require bulky equipment to get rid of trees, grass, old concrete, or anything that needs to be removed. After clearing, we mark the exact measurements for the concrete, we then lay a base over the area and compact it to prepare for pouring.
  2. Forming: Following preparation, we set concrete forms. They are put along the sides of the whole concrete area and held in place with stakes that can easily be dislodged once the concrete has been cured.
  3. Pouring Placement: It is time to pour the concrete. We might be able to pull our truck up to the exact spot and pour our concrete from there. If not, we use a pump to get it exactly where it needs to go. Our professionals will be smoothing out the concrete as it is being poured to establish no air pockets and an even surface.
  4. Pre-finish: We have to level out the top of the pouring concrete and make sure it looks uniform. We then compact the concrete. Depending on what each customer needs, we might perform a steel trowel procedure to create a harder, and smoother top layer.
  5. Finish: Now that the surface has been prepared, we administer finish to the concrete. You can choose from our various types of finishes.
  6. Curing: Now we start the curing process. We recommend the application of a curing compound right after finish. The curing process lasts 28 days, but the first week is the most important. We will also advise you to listen to our time recommendations before driving or walking on your newly installed concrete!
The pouring process can be a very complex and tedious process. Eliminate the stress of it all by hiring us to pour your concrete for you. We take on a large variety of projects and chances are we will be able to do whatever you ask of us. We have completed hundreds of very large commercial and residential projects and we want to make yours the next! Each and every customer has been more than happy with our work so far and we do not intend for that to change. Give us a call today!

    Get a FREE estimate today!
Concrete pouring is the process of creating new concrete surfaces or structures by mixing cement, aggregate, and water to form a strong and durable material. It is a common method used in the construction industry for creating foundations, walls, floors, and other structures.

At our company, we have a team of experienced professionals who are skilled in all aspects of concrete pouring. We use only the highest quality materials and techniques to ensure a strong and durable result.

We offer a full range of concrete pouring services, including design and consultation, foundation pouring, wall pouring, and floor pouring. No matter what your concrete needs may be, we have the expertise to get the job done right.
​
If you're in need of concrete pouring services, don't hesitate to contact us. We can provide a free assessment of your project and recommend the best course of action to meet your needs.